Chemicals

Use our Dosing calculator below for advice on dosing your system with our chemicals, except for Glycol.

Calculator

CORE Glycol Anti-Freeze can be used to allow lower levels of freeze protection. It all depends on what freezing point you desire.

  • -11°C = 25% Glycol concentration of total system water
  • -14°C = 30% Glycol concentration of total system water
  • -17°C = 35% Glycol concentration of total system water
  • -22°C = 40% Glycol concentration of total system water

Inhibitor

Leading corrosion protection

CORE Inhibitor prevents system corrosion and limescale deposition by passivating and protecting bare metal surfaces in commercial heating, chilled & condenser systems. This contributes to a longer system life and improved system efficiencies. Our CORE Inhibitor contains a pH buffer to maintain a neutral system water pH.

  • High-performance heating, chilled & condenser system protection
  • Prevents system corrosion & limescale deposition
  • Helps to increase & maintain system efficiencies
  • Enhanced protection in hard & soft water areas
  • Concentrated formula: Treats system volume at 0.4% dosage rate – 10L treats 2,500L
  • Compatible with all common system metals & materials
  • Helps to reduce CO2 emissions
  • Environmentally friendly, non-toxic formula
Inhibitor

Dual Biocide

High-performance biocide and fungicide

CORE Dual Biocide has been specifically designed to prevent the formation & growth of bacterial contamination, algae & micro-organisms in commercial heating, underfloor heating, low temperature & chilled systems. CORE Dual Biocide contains two separate active ingredients, making it more effective than a single biocidal treatment.

  • Concentrated dual biocide for heating, chilled & condenser systems
  • Prevents the formation & growth of bacterial contamination
  • Effective against Legionella, Pseudomonas, NRB & SRB bacteria
  • Kills fungi & algae
  • Compatible with all common system metals & materials
  • Non-corrosive, concentrated formula
  • Concentrated formula: Treats system volume at 0.4% dosage rate – 10L treats 2,500L
  • Effective up to 60°C
  • Compatible with all CORE range chemicals
Dual Biocide

Leave-in Cleaner

No drain, no flush formula

CORE Leave-In Cleaner has been specifically designed to lift & mobilise magnetic & non-magnetic system contaminants (including biofilms), helping to promote their capture via a magnetic & non-magnetic system filter, which must be present on any system that this product is used to dose.

CORE Leave-In Cleaner can remain in the system with no need to drain & flush after treatment.

  • High-performance heating, chilled & condenser system protection
  • Prevents system corrosion & limescale deposition
  • Helps to increase & maintain system efficiencies
  • Enhanced protection in hard & soft water areas
  • Concentrated formula: Treats system volume at 0.4% dosage rate – 10L treats 2,500L
  • Compatible with all common system metals & materials
  • Helps to reduce CO2 emissions
  • Environmentally friendly, non-toxic formula
Leave-in Cleaner

Heavy-Duty Cleaner

Advanced, high-strength chemical cleaner

CORE Heavy-Duty Cleaner has been specifically designed to rapidly clean all heating, chilled and condenser systems, removing system sludge, debris and scale. CORE Heavy-Duty Cleaner can be left in the system for up to 7 days only. The system should then be thoroughly drained & flushed before refilling with clean system water. Immediate dosing of CORE INHIBITOR should be carried out to protect the system fully.

  • Heavy-duty cleaner for heating, chilled & condenser systems
  • Removes system sludge, debris & scale
  • Helps restore system performance & efficiencies
  • Starts to work as quickly as one hour after the application
  • Can be left in the system for up to 7 days
  • Concentrated formula: Treats system volume at 0.4% dosage rate – 10L treats 2,500L
  • Compatible with all CORE range chemicals
Heavy-Duty Cleaner

System Cleaner

Rapid, powerful chemical cleaner

CORE System Cleaner has been specifically designed for cleaning new & existing heating, chilled and condenser systems, removing system sludge, debris and scale. CORE System Cleaner can be left in the system for up to 28 days for maximum flexibility. The system should be thoroughly drained and flushed before refilling with clean system water. Immediate dosing of CORE INHIBITOR should be carried out to protect the system fully.

  • Powerful cleaner for heating, chilled & condenser systems
  • Removes system debris, scale, flux & oils
  • Helps restore system performance & efficiencies
  • Includes CORE INHIBITOR protection to protect bare metal surfaces during cleaning
  • Can be left in the system for up to 28 days
  • Concentrated formula: Treats system volume at 0.4% dosage rate – 10L treats 2,500L
  • Compatible with all CORE range chemicals
  • Helps to reduce CO2 emissions
  • Environmentally friendly, non-toxic formula
System Cleaner

Glycol Anti-Freeze

High-performance anti-freeze and protector

CORE Glycol Anti-Freeze is a monopropylene, glycol-based anti-freeze, designed to prevent freezing in all types of water which incorporates our CORE INHIBITOR, helping to protect underfloor heating systems, chillers, boilers and their associated chilling & heating systems against corrosion & scale formation and maximising the heat transfer properties of the system. CORE Glycol Anti-Freeze protection down to -22°C at 40% concentration.

  • Monopropylene Glycol Anti-FreeAnti-Freezeled & condenser systems
  • Low toxicity, food & beverage grade glycol
  • Includes CORE INHIBITOR protection to help protect against corrosion &
    limescale formation
  • Helps to increase & maintain system performance & efficiencies
  • Concentrated formula
  • Compatible with all common system metals & materials
  • Protection down to -22°C at 40% concentration
  • Helps to reduce CO2 emissions
  • Environmentally friendly, non-toxic formula
Glycol Anti-Freeze